How to Kill Mold

How to Kill Mold With Bleach

how to kill mold

If you want to learn how to kill mold, there are a few things you should know. Regardless of the reason, the first step to getting rid of mold is to stop the moisture source. This could be a leaky plumbing pipe, recent flood, or other factors that create too much moisture. To start, you should find out how much bleach to water you should use. You should also look for a fungicide if you suspect that mold is present.

Does bleach kill mold

When used properly, bleach can kill mold. But this cleaning product can only kill surface mold. This is because porous materials have holes, pores, and other spaces that allow mold to grow. Using bleach on porous materials can actually drive the mold deeper. It may even damage the surface. So you should be careful about what you use. Here are some guidelines for using bleach. Follow these guidelines to help you get rid of the mold.

If you are worried about the safety of bleach, be sure to read the following information. The chemical bleach can kill surface mold, but not mold that is embedded. The deeper the mold is embedded, the more it grows. So if you think you have visible mold, you should use a different solution, such as vinegar. Vinegar is a safer and more effective way to remove mold. A vinegar solution is better for porous materials.

Bleach solution to kill mold

A bleach solution to kill mold is an effective way to disinfect and clean moldy areas. The toxins that mold emits are airborne. A bleach solution should be diluted to one part bleach to ten parts water and applied to affected areas with a spray bottle or bucket. Bleach does not require any rinsing after application and will kill the mold at its root. Many commercial products for mold removal use a solution of one cup bleach to ten parts water. There are also alternatives to chlorine bleach, including household vinegar.

While bleach is an effective way to kill surface-level mold, it does not penetrate porous surfaces. While it can kill the mold on top, it cannot penetrate the underlying fungi. The result is that a bleach solution will not kill the mold that is underneath the surface of wood or drywall. And it also produces harmful fumes, so it’s important to use gloves when applying the bleach solution to areas with mold.

Bleach to water ratio for mold

To kill mold, you must first mix one cup of bleach to a gallon of water. You can adjust this ratio for larger surfaces. For a two-gallon bucket, you should use one cup bleach to ten cups water. Mix the two ingredients well and spray the affected area. Wait 30 minutes before wiping off the mixture with a rag, sponge or cloth. If the area is too large to spray, you can also apply the solution with a brush.

Another method for killing mold is to use a mixture of baking soda and water. You must dilute the baking soda completely before spraying it on the moldy surface. Once the baking soda has completely dissolved, wipe off the area to get rid of the mold residue. Oxygen and chlorine bleach are good options for killing mold. These types of chemicals use a combination of oxygen and chlorine, as well as sodium hypochlorite, or caustic soda.